iTHERM ModuLine TT151

Технические характеристики

Принцип измерения Литая термогильза
Характеристики / Применение metric style
compliant according to ASME or DIN stadard
universal use
Соединительная головка internal thread:
M14x1,5
M18x1,5
M20x1,5
M27x1,5
1/2" NPT
1/2" NPSM
1/2"NPSC
G1/2"
G2/3"
Макс. стандартная погружная длина 1500 мм
Присоединение к процессу To be
threaded
weld in
with flange according to ASME or EN or ISO
Внутренний диаметр защитной гильзы 9…50 мм
Материал смачиваемых частей Большой выбор материало:
316
316L
316Ti
347
310
Alloy600
AlloyC276
10CrMo9-10
13CrMo4-5
16Mo3
A105
C22.8
Duplex
Титан Gr.2
Шероховатость поверхности смачиваемых частей (Ra) < 0.8 мкм (31.50 мкд)
< 1.6 мкм (63.00 мкд)
Стандарт DIN
Форма наконечника датчика прямой
суженный
ступенчатый
частично суженный
Диапазон температуры -200…1100 °C (-328...2.012 °F)
Зависит от конфигурации
Макс. рабочее давление (статическое) 500 бар (7252 psi)
Зависит от конфигурации
Макс. рабочее давление при температуре +400 °C В зависимости от конфигурации
Макс. рабочее давление при температуре +400 °C Зависит от присоединения к процессу и материала

The thermowell design is based on DIN43772 or ASME B40.9 and additionally it is available as a universal version that can be configured flexibly. The thermowell guarantees a good resistance to typical industrial processes. It comprises a full material bar stock with a root diameter from 9 to 50 mm. The tip can be straight, tapered or stepped. The thermowell can be fitted to a pipe or vessel in the system using a selection of commonly used flanged process connection, thread or weld-in versions.

Преимущества

  • TT151 is an industry standard thermowell manufactured from round barstock
  • Modular configuration according to DIN 43772 or ASME B40.9 or more flexible as universal version
  • Extension, immersion length and total length can be chosen according to process requirements
  • Wide range of dimensions, materials and process connections available

Область применения

  • Protects the temperature sensor against physical and chemical stress
  • High robustness for challenging process conditions
  • Pressure range: up to 500 bar (7252 psi)
  • For use in pipes, vessels or tanks
  • Easier maintenance and recalibration of the measuring point (sensor can be replaced without interrupting the process)
Возникли вопросы?
Звоните по телефону:

Или оставьте нам свой номер телефона. Мы свяжемся с Вами в ближайшее время.

iTHERM ModuLine TT151
ул. Пионерская, 47, 220020, г. Минск, Республика Беларусь
Мы работаем с 09:00 до 17:30

+375 (17) 272 22 11

+375 (17) 272 22 12

+375 (17) 272 22 13

+375 (17) 272 22 14

info@belorg.by

Технические характеристики

Принцип измерения Литая термогильза
Характеристики / Применение metric style
compliant according to ASME or DIN stadard
universal use
Соединительная головка internal thread:
M14x1,5
M18x1,5
M20x1,5
M27x1,5
1/2" NPT
1/2" NPSM
1/2"NPSC
G1/2"
G2/3"
Макс. стандартная погружная длина 1500 мм
Присоединение к процессу To be
threaded
weld in
with flange according to ASME or EN or ISO
Внутренний диаметр защитной гильзы 9…50 мм
Материал смачиваемых частей Большой выбор материало:
316
316L
316Ti
347
310
Alloy600
AlloyC276
10CrMo9-10
13CrMo4-5
16Mo3
A105
C22.8
Duplex
Титан Gr.2
Шероховатость поверхности смачиваемых частей (Ra) < 0.8 мкм (31.50 мкд)
< 1.6 мкм (63.00 мкд)
Стандарт DIN
Форма наконечника датчика прямой
суженный
ступенчатый
частично суженный
Диапазон температуры -200…1100 °C (-328...2.012 °F)
Зависит от конфигурации
Макс. рабочее давление (статическое) 500 бар (7252 psi)
Зависит от конфигурации
Макс. рабочее давление при температуре +400 °C В зависимости от конфигурации
Макс. рабочее давление при температуре +400 °C Зависит от присоединения к процессу и материала

The thermowell design is based on DIN43772 or ASME B40.9 and additionally it is available as a universal version that can be configured flexibly. The thermowell guarantees a good resistance to typical industrial processes. It comprises a full material bar stock with a root diameter from 9 to 50 mm. The tip can be straight, tapered or stepped. The thermowell can be fitted to a pipe or vessel in the system using a selection of commonly used flanged process connection, thread or weld-in versions.

Преимущества

  • TT151 is an industry standard thermowell manufactured from round barstock
  • Modular configuration according to DIN 43772 or ASME B40.9 or more flexible as universal version
  • Extension, immersion length and total length can be chosen according to process requirements
  • Wide range of dimensions, materials and process connections available

Область применения

  • Protects the temperature sensor against physical and chemical stress
  • High robustness for challenging process conditions
  • Pressure range: up to 500 bar (7252 psi)
  • For use in pipes, vessels or tanks
  • Easier maintenance and recalibration of the measuring point (sensor can be replaced without interrupting the process)

Оставить заявку