iTHERM ModuLine TT131

Технические характеристики

Принцип измерения Сварная термогильза
Характеристики / Применение метрические размеры
согласно DIN 43772
присоединение к процессу: резьбовое, фланцевое, обжимной фитинг
с шейкой
Соединительная головка Внешняя резьба:
M24 x 1,5, 1/2" NPT, G1/2
Внутренняя резьба:
M20 x 1,5, 1/2" NPT, G1/2
QuickNeck
Макс. стандартная погружная длина 4500 мм (177")
Максимальная длина по запросу 4500 мм (177")
Присоединение к процессу Резьба:
G3/8", G1/2", G3/4", G1"
NPT1/2", NPT3/4", NPT 1"
M18x1,5, M20x1,5, M27x2, M33x2
R1/2", R3/4"
Накидная гайка:
M20x1,5, G1/2", G3/4"
Обжимной фитинг:
NPT1/2", G1/2", G1"
Фланец:
DN15 PN40 B1, C
DN25 PN20, PN40, PN100 B1, B2, C
DN40 PN40 B1
DN50 PN40 B1
ASME 1" 150 RF
ASME 1" 300 RF
ASME 1 1/2" 150 RF
ASME 2" 150 RF
ASME 2" 300 RF
Внутренний диаметр защитной гильзы 9x1,25 мм
11x2 мм
12x2,5 мм
14x2 мм
16x3,5 мм
1/4" SCH80
1/2" SCH80
1/2" SCH40
Материал смачиваемых частей 316 (1.4401)
316L (1.4404)
316Ti (1.4571)
Сплав Alloy 600 (2.4816)
Сплав Alloy C276 (2.4819)
Сплав Alloy 446 (1.4749)
Сплав Alloy 321 (1.4541)
Оболочка: PTFE
Оболочка: тантал
Шероховатость поверхности смачиваемых частей (Ra) < 1,6 мкм (63,00 мкдюйма)
Форма наконечника датчика прямой
усеченный
суженный
оптимизировано для обеспечения малого времени отклика
Диапазон температуры -200...1100 °C (-328...2012 °F)
Макс. рабочее давление (статическое) В зависимости от конфигурации, до 100 бар
Макс. рабочее давление при температуре +400 °C В зависимости от конфигурации

This thermowell designed according to DIN 43772 guarantees a high resistance to most industrial process environments. It is made from pipe or tube and is available in a wide range of diameters and materials. A specially designed thermowell tip ensures fast response times for a more efficient process control. Oversheaths in PTFE or tantalum can withstand extremely corrosive process conditions. It is offered with a variety of process connections: flanges, threads, weld-in or compression fittings.

Преимущества

  • Modular configuration according to DIN 43772
  • iTHERM QuickNeck: cost and time savings thanks to simple, tool-free recalibration of the insert
  • Extension, immersion length and total length can be chosen according to process requirements
  • Wide choice of dimensions, materials and process connections available
  • Specially designed tip for fast response times

Область применения

  • Protects the temperature sensor against physical and chemical stress
  • High robustness for challenging process conditions
  • Pressure range: up to 100 bar (1450 psi)
  • For use in pipes, containers or tanks
  • Improved ease of maintenance (sensor replacement without process shutdown) and recalibration of the measuring point
Возникли вопросы?
Звоните по телефону:

Или оставьте нам свой номер телефона. Мы свяжемся с Вами в ближайшее время.

iTHERM ModuLine TT131
ул. Пионерская, 47, 220020, г. Минск, Республика Беларусь
Мы работаем с 09:00 до 17:30

+375 (17) 272 22 11

+375 (17) 272 22 12

+375 (17) 272 22 13

+375 (17) 272 22 14

info@belorg.by

Технические характеристики

Принцип измерения Сварная термогильза
Характеристики / Применение метрические размеры
согласно DIN 43772
присоединение к процессу: резьбовое, фланцевое, обжимной фитинг
с шейкой
Соединительная головка Внешняя резьба:
M24 x 1,5, 1/2" NPT, G1/2
Внутренняя резьба:
M20 x 1,5, 1/2" NPT, G1/2
QuickNeck
Макс. стандартная погружная длина 4500 мм (177")
Максимальная длина по запросу 4500 мм (177")
Присоединение к процессу Резьба:
G3/8", G1/2", G3/4", G1"
NPT1/2", NPT3/4", NPT 1"
M18x1,5, M20x1,5, M27x2, M33x2
R1/2", R3/4"
Накидная гайка:
M20x1,5, G1/2", G3/4"
Обжимной фитинг:
NPT1/2", G1/2", G1"
Фланец:
DN15 PN40 B1, C
DN25 PN20, PN40, PN100 B1, B2, C
DN40 PN40 B1
DN50 PN40 B1
ASME 1" 150 RF
ASME 1" 300 RF
ASME 1 1/2" 150 RF
ASME 2" 150 RF
ASME 2" 300 RF
Внутренний диаметр защитной гильзы 9x1,25 мм
11x2 мм
12x2,5 мм
14x2 мм
16x3,5 мм
1/4" SCH80
1/2" SCH80
1/2" SCH40
Материал смачиваемых частей 316 (1.4401)
316L (1.4404)
316Ti (1.4571)
Сплав Alloy 600 (2.4816)
Сплав Alloy C276 (2.4819)
Сплав Alloy 446 (1.4749)
Сплав Alloy 321 (1.4541)
Оболочка: PTFE
Оболочка: тантал
Шероховатость поверхности смачиваемых частей (Ra) < 1,6 мкм (63,00 мкдюйма)
Форма наконечника датчика прямой
усеченный
суженный
оптимизировано для обеспечения малого времени отклика
Диапазон температуры -200...1100 °C (-328...2012 °F)
Макс. рабочее давление (статическое) В зависимости от конфигурации, до 100 бар
Макс. рабочее давление при температуре +400 °C В зависимости от конфигурации

This thermowell designed according to DIN 43772 guarantees a high resistance to most industrial process environments. It is made from pipe or tube and is available in a wide range of diameters and materials. A specially designed thermowell tip ensures fast response times for a more efficient process control. Oversheaths in PTFE or tantalum can withstand extremely corrosive process conditions. It is offered with a variety of process connections: flanges, threads, weld-in or compression fittings.

Преимущества

  • Modular configuration according to DIN 43772
  • iTHERM QuickNeck: cost and time savings thanks to simple, tool-free recalibration of the insert
  • Extension, immersion length and total length can be chosen according to process requirements
  • Wide choice of dimensions, materials and process connections available
  • Specially designed tip for fast response times

Область применения

  • Protects the temperature sensor against physical and chemical stress
  • High robustness for challenging process conditions
  • Pressure range: up to 100 bar (1450 psi)
  • For use in pipes, containers or tanks
  • Improved ease of maintenance (sensor replacement without process shutdown) and recalibration of the measuring point

Оставить заявку