Thermowell for temperature sensors MLTWS01

Технические характеристики

Принцип измерения Сварная термогильза
Характеристики / Применение Готовая к использованию защитная трубка
Аналогично DIN 43772, форма 2F/3F
Соединительная головка внешняя резьба: M24 x 1,5
Макс. стандартная погружная длина 445 мм, другие значения длины по запросу
Присоединение к процессу Фланец:
DN25 PN40 B1 (EN1092-1)
DN25 PN63 B1 (EN1092-1)
Внутренний диаметр защитной гильзы 16 x 10 мм
Материал смачиваемых частей 1.4571
Форма наконечника датчика Усеченный, диаметр 12 x 7 x 50 мм
Диапазон температуры 200…600 °C (-328...1.112 °F)
Макс. рабочее давление при температуре +400 °C В зависимости от номинального давления, до PN63

This protection tube is an important component for temperature measurement points for almost all industrial processes, especially for Oil & Gas industries. It is used to protect the measuring insert or sensor elements from aggressive process media, high pressures and flow rates from the temperature sensor itself and thereby enables the thermometer to be exchanged during operation.

Преимущества

  • Thermowell fabricated from welded tubes
  • The process connection is flanged
  • Extension, immersion length and total length can be chosen according to process requirements
  • Special versions can be manufactured according to customer requirements

Область применения

The thermowell is designed for use in the Oil & Gas industry but can also be used for general applications. Modular configuration enables a use in all industrial processes with severe thermal and mechanical stresses.

Возникли вопросы?
Звоните по телефону:

Или оставьте нам свой номер телефона. Мы свяжемся с Вами в ближайшее время.

Thermowell for temperature sensors MLTWS01
ул. Пионерская, 47, 220020, г. Минск, Республика Беларусь
Мы работаем с 09:00 до 17:30

+375 (17) 272 22 11

+375 (17) 272 22 12

+375 (17) 272 22 13

+375 (17) 272 22 14

info@belorg.by

Технические характеристики

Принцип измерения Сварная термогильза
Характеристики / Применение Готовая к использованию защитная трубка
Аналогично DIN 43772, форма 2F/3F
Соединительная головка внешняя резьба: M24 x 1,5
Макс. стандартная погружная длина 445 мм, другие значения длины по запросу
Присоединение к процессу Фланец:
DN25 PN40 B1 (EN1092-1)
DN25 PN63 B1 (EN1092-1)
Внутренний диаметр защитной гильзы 16 x 10 мм
Материал смачиваемых частей 1.4571
Форма наконечника датчика Усеченный, диаметр 12 x 7 x 50 мм
Диапазон температуры 200…600 °C (-328...1.112 °F)
Макс. рабочее давление при температуре +400 °C В зависимости от номинального давления, до PN63

This protection tube is an important component for temperature measurement points for almost all industrial processes, especially for Oil & Gas industries. It is used to protect the measuring insert or sensor elements from aggressive process media, high pressures and flow rates from the temperature sensor itself and thereby enables the thermometer to be exchanged during operation.

Преимущества

  • Thermowell fabricated from welded tubes
  • The process connection is flanged
  • Extension, immersion length and total length can be chosen according to process requirements
  • Special versions can be manufactured according to customer requirements

Область применения

The thermowell is designed for use in the Oil & Gas industry but can also be used for general applications. Modular configuration enables a use in all industrial processes with severe thermal and mechanical stresses.

Оставить заявку